Introducing the Indoor Car Storage Bubble (inflatable car cover) — a premium solution for dust-free indoor vehicle storage. Continuous airflow and filtration create a cleaner environment to help keep your car showroom-ready during long-term storage.
The Indoor Inflatable Car Storage Bubble is a premium indoor solution designed to keep your vehicle protected and showroom-ready while still on display. It creates a dust-reduced, controlled environment with continuous airflow and filtration, helping your car stay clean and reducing the typical risks of long-term indoor storage such as dust buildup and moisture-related issues. Thanks to its fully transparent design, you can admire your car from every angle while it remains protected.
The video below shows the outdoor version in action. The concept and operation are the same for the indoor fully transparent bubble: continuous airflow, filtration, and a sealed protective environment for storage.
Select the bubble size based on your vehicle category and overall length/width/height. If you are between two sizes, choose the larger option to ensure comfortable clearance.
For more details, see our FAQ Car Storage Bubble Guide.
It’s an inflatable indoor enclosure designed to keep a vehicle clean during storage by continuously moving filtered air inside the bubble. The goal is a dust-free environment and reduced moisture/condensation risk during storage.
Once the fan is connected to power, the bubble inflates fully in approximately 8–10 minutes.
Unroll the bubble on the floor, open the zippers to separate the transparent top from the base so you can drive the car onto the base, center the car, pull the transparent top over the car, close the zipper, then connect the fan and install the air filter once inflated.
The kit includes the inflatable car storage bubble plus one set of spare parts: an extra fan, an extra air filter, and an extra power supply (adapter).
The adapter listed is Samsung PN4012AL with input 100–240V and output 12V / 3.34A, which is compatible with standard US voltage (110–120V) as it accepts 100–240V input.
The spec lists a transparent plastic sheet of 0.2 mm for the indoor bubble, and a 0.6 mm sheet for the base.
Measure your vehicle “bumper to bumper” and “tire to tire” and pick a bubble size that is safely larger than your car’s overall length/width/height.
Sedan sizes (L × W × H):
XS: 13.1 ft × 6.9 ft × 5.2 ft (example: Toyota Yaris)
S: 14.4 ft × 6.9 ft × 5.2 ft (example: BMW Z4 / Mercedes SLK / BMW 3 Series / C Class)
M: 15.7 ft × 6.9 ft × 5.2 ft (example: Honda Accord / Ferrari / Lamborghini)
L: 17.1 ft × 6.9 ft × 5.2 ft (example: Mercedes S Class / BMW 7 Series)
XL: 18.4 ft × 7.2 ft × 5.2 ft (example: Rolls Royce Ghost / Bentley)
XXL: 19.7 ft × 7.2 ft × 5.2 ft (example: American classic cars)
SUV sizes (L × W × H):
XS: 13.1 ft × 6.9 ft × 6.9 ft
S: 14.4 ft × 6.9 ft × 6.9 ft (example: Jeep Wrangler JK 3 Door)
M: 15.7 ft × 6.9 ft × 6.9 ft (example: Honda CRV / Mitsubishi Pajero)
L: 17.1 ft × 6.9 ft × 6.9 ft (example: Toyota Land Cruiser)
XL: 18.4 ft × 7.2 ft × 6.9 ft (example: Hummer)
XXL: 19.7 ft × 7.2 ft × 6.9 ft (example: American SUVs)
The concept is continuous airflow of filtered air, intended to reduce dust and help address moisture/condensation conditions that can contribute to corrosion during storage.
After the bubble is fully inflated, install the air filter.
Place the car centered on the base, leaving the same distance on both sides and front/back before closing the bubble.

